![]() Files on the 32 MB QUADSPI or microSD card can be accessed over USB.USB-C for power, battery charging, and connecting to the PC.Can do 1920x1080 at 60 Hz static images.Can do 1920x1080 at 30 Hz dynamic images.In special cases 1920x1080 is supported.HDMI Display Output - can mirror the display or run without the onboard display.Up to 5 point at a time touch detection for Rich GUI support.A 4.3” 800x480 IPS TFT capacitive touch LCD.Or can be used for internet connectivity for any purpose.Can stream MJPEG compressed images at up to 12 Mb/s using RTSP.A buzzer with volume and frequency control for audio notifications.A High-brightness White LED Illuminator.The VL53L0X Laser Range Finder (can measure up to 2 meters).SUPPORT FOR GETTING THE TEMPERATURE PER PIXEL IN CELSIUS!.Supports non-radiometric/radiometric Leptons seamlessly.RTC for date/time stamp keeping when battery backed.w/ 32 MB of QUADSPI flash running at 50 MB/s.The STM32H743XI Arm® Cortex®-M7 SoC running at 480 MHz.It’s got TensorFlow support and can run Neural Networks, it can track colored objects, do person detection, and much more! For a complete description of all the functionality onboard and what can be done see the API. You program it with the amazing OpenMV IDE. The PureThermal OpenMV is based on the OpenMV Cam H7 Plus by OpenMV. The PureThermal OpenMV is the product you’ve been waiting for! Finally, the PureThermal OpenMV can be programmed like any OpenMV Cam in Python to make it do anything you like via the MicroPython API. Live video can be displayed on the 4.3” 800x480 IPS TFT capacitive touch LCD onboard, mirrored to an HDMI monitor, or streamed over WiFi via RTSP. For sensors the board features a 5MP OV5640 camera module, a FLIR Lepton socket capable of supporting any FLIR Lepton, and the VL53L0X laser range finder to assist in drawing the thermal image on the color image using the right offset/scaling. At least that’s valid for Canada, Australia, the United Kingdom, and countries in the European Union, aka the “international community” (another joke), as residents from other countries are out of luck, and GroupGets won’t be able to ship to them.The PureThermal OpenMV by GetLab is a co-designed collaboration product between GetLab and OpenMV to produce a high-end mixed color and thermal camera for professional applications. Purchasing from the US should be a breeze, but all international customers will be considered suspected terroristic or Putin sympathizers (that’s a joke) and will have to fill out an End Use Statement document before shipment to comply with US regulations. It’s possible to replace the Lepton FS module with FLIR Lepton 3.5 module for $50, or $249.99 in total. The PureThermal 3 board can be purchased for $199.99 plus shipping on the GroupGets group buying platform. But if it works for your application, you’ll save about $50 against the more accurate FLIR Lepton 3.5 module. There are some caveats when using the $99 Lepton FS thermal camera module including reduced thermal sensitivity, reduced scene dynamic range, and up to 3% inoperable pixels, and it cannot be used for radiometric applications. The firmware will also be made available on the GroupGets Github account. The board works just like a USB camera, but requires specific software to visualize the data such as GetThermal open-source image viewer for Linux and macOS. PureThermal 3 board with Tag-Connect EC-10-IDC Misc – Boot and Reset buttons ( improved).Castellated edge with full JTAG breakout for rapid flashing via Tag-Connect EC-10-IDC.Supports flash custom firmware with USB DFU.I/Os – Partially MikroBUS compatible breakout pin configuration with GPIOs, UART, I2C, SPI (3V), +5V (V_IN), +3.3V (+3V), and GND.USB – USB Type-C port with USB UVC (works on Windows, Linux, Mac, and sometimes Android).Ships with FLIR Lepton FS non-radiometric 160 x 120 resolution micro thermal camera module.Supports LIR Lepton (2.x – 3.x) LWIR camera cores.Microcontroller – STMicro STM32F412 Arm Cortex-M4 MCU 100 MHz with up to 1024 KB flash, 256 KB SRAM.PureThermal 3 specifications with changes highlighted in bold: Some changes include the removal of pads to install an RF shield, and the Tag-Connect TC2030 programming connector is replaced by the Tag-Connect EC-10-IDC. The company explains the new model offers the same basic functionality as the PureThermal 2 but with a few changes and additional features, although the motivation for the new design was primarily to address component shortages. Groupgets PureThermal 3 (PT3) is a hackable thermal webcam that ships with the low-cost FLIR Lepton FS module, and is compatible with FLIR Lepton (2.x – 3.x) LWIR camera core.
0 Comments
Leave a Reply. |